Apc Back-ups Pro Vs Apc Ups Battery Backup
Design
While aesthetics are hardly the strong suit of any UPS, both of these models come equipped with some interesting design choices that make them easier to use. Both models are equipped with front-facing led panels that display the current load of the UPS, the battery charge, and the predetermined input voltage.
One key difference here, however, is that the LED screen for the CyberPower can be tilted upwards, allowing you to view the screen without having to get down on the ground. APC has taken a slightly different approach, lobbing off the top corner of the UPS to make space for an LED screen that's always looking up at you.
Both models also include a single USB-A and USB-C port on the front, providing you with an additional charging port, or allowing you to keep your mobile device topped off in the event of an emergency.
Likely the most glaring difference between these two models is the number of outlets they provide, the CyberPower provides you with 6 surge protected and 6 battery backup outlets, whereas the APC only has 5 surge and 5 battery backup outlets.
The 9 Best Uninterruptible Power Supplies (UPS) of 2021
Features
Both the CyberPower and APC feature automatic voltage regulation (AVR) as well as an audible alarm if the voltage dramatically changes or the battery has to kick in. While the alarm is enabled by default, there is a mute button on the front panel of both models to disable it. They both also include robust suites of features including scheduling functions, fault detection, and Ethernet surge protection. And, if you happen to be using either UPS as a node between desktop workstations, they both also have the ability to be hard-wired and controlled directly from a desktop via a USB or Serial connection.
There are some small differences between these models as far as power distribution. Because the CyberPower has 2 additional outlets, it is only capable of running at 2.5 minutes on a full battery charge when operating under a full load, compared to the APC, which is capable of operating for up to 4 mins, which can be attributed to its slightly lower load capacity.
Both models do have ample slack in regards to their AC cables, and while it's likely to make very little difference, the APC does have a slightly longer, 6 ft. cable when compared to the CyberPower's 5 ft.
The CyberPower comes equipped with an extra pair of Ethernet ports for slotting in a remote management card, allowing you to monitor and control the UPS remotely. But the APC has a coaxial throughput connection for extending surge protection to your cable modem. So depending on your priorities or the types of devices you'll want to protect, one of these options is going to be slightly better than the other.
The 7 Best Desktop PCs of 2021
Price
The price of both of these models is pretty much the same, each costing a little over $200. And while both of these devices offer the same 3-year warranty, one key difference is that the CyberPower model offers a $500,000 connected equipment guarantee, should any of your devices ever become inoperable as a fault of the UPS, while the APC offers $150,000. Both of these numbers are likely to be substantially more than even the most expensive home theater setup, but if you're using either of these units for commercial application, this might be something to consider.
Apc Back-ups Pro Vs Apc Ups Battery Backup
Source: https://www.lifewire.com/cyberpower-cp1500-vs-apc-1500va-pro-5089713
0 Response to "Apc Back-ups Pro Vs Apc Ups Battery Backup"
Publicar un comentario